Charging your SmartBand 2
Before using your SmartBand 2 for the first time, you need to charge it for approximately 30 minutes. Sony chargers are recommended.
Your SmartBand 2 turns off automatically when the charger is connected. You cannot turn on the device while a charger is connected.
To charge your SmartBand 2
- Plug one end of the USB cable into the charger or into the USB port of a computer.
- Plug the other end of the cable into the Micro USB port of your SmartBand 2.
- While the battery is charging, notification light A changes from red to orange. The notification light changes to green when you reach 90% battery power.
Make sure the USB port is clean and dry before you insert a USB cable into the port. It’s recommended to use a microfibre cloth.
Your SmartBand 2 turns off when connecting to a charger, and goes back to its previous on/off state when the charger is unplugged.
Battery notification light status
|Red light||Battery is charging and the charge level is less than 15%.|
|Orange light||Battery is charging and the charge level is between 15% and 90%.|
|Green light||Battery is charging and the charge level is greater than 90%.|
To check the battery level of your SmartBand 2
- From the main application screen of your Android™ device, find and tap the SmartBand 2 application, the battery percentage level appears on the screen.
Low battery level notification
When your SmartBand 2 reaches a specific battery level, the device vibrates and the red light starts flashing every 4 seconds until you charge the device or it powers off. The low battery level notification is triggered when you have approximately 5 minutes left in Heart Activity mode and 75 minutes in STAMINA mode. The time varies depending on usage. When battery level is below 1%, your SmartBand 2 automatically turns off. You need to charge your SmartBand 2 when the battery runs out of power.
If the "Do not disturb" function is turned on, you will not get the low battery notification.